Bleeding brakes with PSM

[dj996]

The tech manual desribes a two part process, first bleed as normal then use a System 2 tester to bleed the brakes. I'm confused, does anyone actually do ths or can I just bleed as normal with a power bleeder. I'm want to put on some new pads(Pagids) before the next track day.

[Tool Pants]

If you have not taken the brake system apart then just bleed away. I asked Peter why this was was in the workshop manual some time ago and it is if you have replaced the ABS unit. PCA Tech

This is how I do it when you want to go twice as fast. Jeff

[Loren]

I agree with Jeff that if the system has not been drained then you don't need to do anything special for PSM or Traction Control. You may want to bleed the clutch though. It is not very hard and you can find details at this link: Brake/Clutch Fluid Change and Bleeding Instructions

[dj996]

I agree with Jeff that if the system has not been drained then you don't need to do anything special for PSM or Traction Control. You may want to bleed the clutch though. It is not very hard and you can find details at this link:  Brake/Clutch Fluid Change and Bleeding Instructions

Thanks guys, great site Loren. Long overdue IMO :)