Cup Rotors?

[GreigM]

I've read in a couple of places of people using "Cup" rotors as they start thinner and are cheaper - these days I am disposing of rotors due to cracks rather than wear so if there is a cheaper route to replacing them I would be interested.

This would be for a Mk1.

[Loren]

996.351.409.9J Left Front Rotor (350 mm x 33 mm)

996.351.410.9J Right Front Rotor (350 mm x 33 mm)

996.352.405.90 Left Rear Rotor (330 mm x 28 mm)

996.352.406.90 Right Rear Rotor (330 mm x 28 mm)

[plima]

For Mk-2 GT3, the cup rotors work well ( try http://www.carnewal-europe.com/main.htm ) as replacements for the street rotors. I don't know about Mk-1, as I think the rotors are smaller diameter

[GreigM]

Brilliant, thanks Loren.

[GreigM]

In fact, checking on it the Mk1 has 330mm rotors all round - are those the correct numbers loren?

[Loren]

You asked for the Cup Car rotors - those are the numbers from my 2003 Cup Car parts list.

[GreigM]

2003 would be a Mk2 - Mk1 Cup cars would have been 99/2000 - do you have a parts list for these years? Thanks for the effort anyway.

[Loren]

Sorry, I don't have a 2000 Cup Car Book only a 2000 GT3 R Book - which is a different animal.