Sport Exhaust tip installation for TT

[NeverFastEnough]

I apologize in advance if this has been posted but I can't find it.

I just got a pair of the Porsche Sport Exhaust tips for the Turbo, and I am trying to figure out how to install them.

I assume it is a matter of releasing a ring clamp which I see at the base of the stock tips (at the exit tube off the muffler) and just twisting the old ones off and putting the new ones one, and of course retightening the ring clamp.

If anyone has done this and I assume many have, is this correct and what is the torque specs on the ring clamp which holds the tips on?

Thanks in advance.

[Loren]

Yes, just one clamp.

When installing the gap at the top (dimension A ) should be 26 ± 1 mm; the gap at the side should be (dimension B ) 32 ± 1 mm.

Then tighten the clamp to 44 ft-lbs.

[NeverFastEnough]

Thanks Loren,

That info is just what I was looking for.

It always amazes me how you find these obscure tech tips, etc. :D .

[YumYumz]

I apologize in advance if this has been posted but I can't find it.

I just got a pair of the Porsche Sport Exhaust tips for the Turbo, and I am trying to figure out how to install them.

I assume it is a matter of releasing a ring clamp which I see at the base of the stock tips (at the exit tube off the muffler) and just twisting the old ones off and putting the new ones one, and of course retightening the ring clamp.

If anyone has done this and I assume many have, is this correct and what is the torque specs on the ring clamp which holds the tips on?

Thanks in advance.

I just got a pair of sports exhaust tips myself, and I was wondering whether you had to remove the rear bumper to install the ring clamp?

[Cayenne17]

I apologize in advance if this has been posted but I can't find it.

I just got a pair of the Porsche Sport Exhaust tips for the Turbo, and I am trying to figure out how to install them.

I assume it is a matter of releasing a ring clamp which I see at the base of the stock tips (at the exit tube off the muffler) and just twisting the old ones off and putting the new ones one, and of course retightening the ring clamp.

If anyone has done this and I assume many have, is this correct and what is the torque specs on the ring clamp which holds the tips on?

Thanks in advance.

I just got a pair of sports exhaust tips myself, and I was wondering whether you had to remove the rear bumper to install the ring clamp?

Only remove clamp no bumper...REQUIRED TURBO VALENCE PIECE OF CAKE TO INSTALL