Stupid little clip

[landlwilson]

So I put in the B&M SSK and lowered the car this weekend(way to easy) and I broke to little plastic clips that hold the wire away from the strut. This wire goes from one side of the brake caliper to the other. Tried explaining it to my local p-shop but........ anyways it is a really small item but with out the part number I am up the creek. Any help would be greatly appreciated

01 C2 CAB

[Loren]

Front or rear? (or both?)

A picture would help too...

[PorschePRH]

The clip that is on the shock? I broke one and just used a tie wrap to hold it to the same mounting hole.

[landlwilson]

Front or rear? (or both?)

A picture would help too...

<{POST_SNAPBACK}>

Front and it is on the blade in the rear of the strut right below the electrical wire that attaches to the caliper. they both clip onto the same blade. I would send a picture but I zipped tied them back on. Here is my diagram of it

[landlwilson]

Front or rear? (or both?)

A picture would help too...

<{POST_SNAPBACK}>

Front and it is on the blade in the rear of the strut right below the electrical wire that attaches to the caliper. they both clip onto the same blade. I would send a picture but I zipped tied them back on. Here is my diagram of it

[landlwilson]

Front or rear? (or both?)

A picture would help too...

<{POST_SNAPBACK}>

Ok maybe this will help. Look at this post http://www.renntech.org/forums/index.php?s...=2532&hl=shocks

Picture number 2 has a wire in a gromet on the strut. Right below that is my clip

[KevinC]

Front or rear? (or both?)

A picture would help too...

<{POST_SNAPBACK}>

Ok maybe this will help. Look at this post http://www.renntech.org/forums/index.php?s...=2532&hl=shocks

Picture number 2 has a wire in a gromet on the strut. Right below that is my clip

<{POST_SNAPBACK}>

That's the clip which helps route the brake wear sensor wire around the strut to the caliper. It secures the sensor wire to one of the hard brake lines. I have broken one of those clips and also had a hard time getting a replacement from the dealer's parts counter. I don't seem to have any significant problems without the clip.

[Loren]

Item 6 (below)?

[landlwilson]

Item 6 (below)?

<{POST_SNAPBACK}>

yep that is it!!!

[Loren]

999 591 930 40 Cable holder - Retail $0.23 each

[landlwilson]

999 591 930 40 Cable holder - Retail $0.23 each

<{POST_SNAPBACK}>

Thanks Loren! :clapping: :clapping: :clapping: