PDK codes

[dammad]

I was resetting my service reminder when I noticed the following codes on my PDK box:

 

U0155: CAN timeout instrument cluster

U0146: CAN timeout gateway

U0418: CAN fault brake

1990: Positive engine torque intervention not possible

U0423: CAN fault instrument cluster

 

The car seems to run fine but I can’t clear the codes with the durametric and a battery reset didn’t help either. Any ideas?

 

Thanks for any pointers you may have. Hoping I’m not in for a $$$$ bill.

 

 

 

Sent from my iPhone using Tapatalk

[Loren]

Exact model and year of the car please?

[dammad]

Sorry forgot. 2009 C4S cab.


Sent from my iPhone using Tapatalk

[Loren]

U0155 Instrument cluster, communication

Possible fault causes

- No power supply for instrument cluster
- Instrument cluster incorrectly coded
- Short circuit or open circuit in the CAN display
- Instrument cluster faulty (in most cases the cause is not the instrument cluster but incorrect coding!)

 

 

U0146 Gateway control unit communication

Possible fault causes

- No power supply for Gateway control unit
- Incorrect coding of Gateway control unit
- Short circuit or open circuit of CAN Drive
- Gateway control unit faulty (in most cases the cause is incorrect coding and not the Gateway control unit!)

 

 

U0418 Stop light switch

Possible fault causes

- Open circuit in signal wire from stop test switch
- Stop light switch faulty

 

 

U0423 Fault entry in specified control module

Possible fault causes

- Control module is incorrectly coded
- Periphery connected to specified control module is incorrect
- Control module faulty (in most cases the cause is not the control module but incorrect coding!)

 

1990 Positive engine torque intervention not possible

Possible fault causes

- Fault in CAN bus
- DME control unit detects engine fault

 

[dammad]

Thanks Loren. Is there a diagram of the CAN bus somewhere? It seems a common element in many. Perhaps the plug into the PDK is old/faulty?


Sent from my iPhone using Tapatalk