Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

Posted

Hi all I new to cayenne bought the truck a few months back ,fix all back up so far great truck , every time I start the car air suspension fault workshop,I've done the compressor piston ring and still I get the code on the selector inside It shows the different selection in the cluster but it doesn't raise or lower sometime I drive the back bouncy around real bad and rides horrible I don't have access to durametric so idont have any codes .thanks

Posted (edited)

Try to go to the Level Control Module in Vagcom and it should work if you have the newer version. The Audi A8/Q7 and the older Allroad all have a very similar version of the Cayenne/Touareg Air suspension. Actually, the parts and modules are all the same manufacturers, just model differences. I have both Vagcom and Durametric and use them almost interchangeably.  The Vagcom works better on the Porsche than the Durametric works on the Audi.

Edited by hahnmgh63
Posted (edited)

I was able to make an adapter to get the vagcom to work and I get this code and erase it and it comes right back not sure where to go from here I also notice I can't lower or raise the truck .thanks again

 

post-1-0-46103900-1413595891_thumb.jpg

Edited by Loren
rotated image
Posted

I was warned by Owen at Durametric not to use vagcom on porsche as it can cause can bus faults and display false codes.

  • 2 weeks later...
Posted

have you replaced the air pressure retaining valves on 4 corners? about 80 bucks each. need special tools to take them out. front 2 are easy. back are hard but doable.

when they have problem car won't lower or raise. 

I talked to the local dealer parts guys and they replace those frequently.

Posted

If the fault shown in post #5 is accurate, then it looks like the sensor at the spare wheel filling port might be faulty.  That's the one under the front passenger seat. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.