Need Help With Vacuum Lines

[Nivaldo Veliz]

need help, it is a 98 Boxster 2.5 as you see in the picture the red lined tube is the one not in diagram, the blue and green circles i dont know where they go, neither the purple, now the yellow line leads to the back and that too i dont know where it goes, thank-you :)

Edited May 22, 2013 by Nivaldo Veliz

[bar10dah]

Does diagram in post #12 here help?

Blue goes to purple.

Green goes to the valve that's under your passenger side (if your steering wheel is on the left) intake manifold.

<EDIT: This may be wrong, as you've stated you have a four hose splitter, instead of the three.>

Edited May 22, 2013 by bar10dah

[Nivaldo Veliz]

this one is closer to what i have the connector has 4 not 3 but im still a bit lost as i have that extra elbow in (lined in red)

( POST #3 )

http://forums.pelicanparts.com/boxster-cayman-forum/597995-air-intake-vacuum-line-routing.html

[bar10dah]

It's been a while since I had my head in a Boxster engine compartment. I just can't seem to remember that line marked in red. If I remember, I'll reply back.

[Nivaldo Veliz]

Thank-you I really appreciate your input :)

[Nivaldo Veliz]

would you happen to know where the one lined in yellow goes?

[bar10dah]

Looking at your picture again, I may be wrong. It appears that valve where the blue and the green are is probably your switch for the resonance flap valve? Which, is probably under the driver's side manifold?

I'm seriously having a hard time visualizing this. Which direction in the picture is forward?

It appears, using the chart in post #3 of the link to Pelican you provided:The black dome thing in the bottom right of your picture is F.The black/white valve to the right of the purple in your picture is H.The switch with the blue and green is probably J. Find K and you'll see where to connect green to.

If that switch is truly J, then connect blue to purple.

I really can't tell what the red is. A better picture of it may help.

And neither the yellow. What does the other end connect to?

Edited May 22, 2013 by bar10dah

[Nivaldo Veliz]

i will take a more clear and direct picture, gimme a sec :)

[Nivaldo Veliz]

OK, heres what i got, the turqouise circle, lines and arrows are what i beleve go the the throttle body sleeve, i dont know if the pink goes to blue or to red, same with green

[bar10dah]

Oh wow, yeah. Much different than my setup. Let me look at the pic for a bit and I'll respond back.

[Nivaldo Veliz]

the yellow i think may lead to (K), the red might go to blue, but green cant go to purple because in the pelican diagram blue goes to (K)

[bar10dah]

Okay, these are my guesses. Someone that actually has a 4-way splitter system can give you better advice.

I can't tell in the pic if it's connected, but that black/white valve needs to connect to the throttle body sleeve. More specifically, the black side of that valve connects to the sleeve and the white side to the 4-way splitter.

The blue circle in the second pic should connect to the pink in the second pic. In the first pic, it's the blue to purple.

Green in both pics should go to the switch that controls the resonance flap.

I really can't tell what the red is in the second pic. Is that the same as the yellow in the first pic?

[Nivaldo Veliz]

yeah, red is the same as yellow in first pic witch i think leads to (K)- (Resonance flap valve)

[bar10dah]

yeah, red is the same as yellow in first pic witch i think leads to (K)- (Resonance flap valve)

If one end of that line is connected to the resonance flap valve, then the other end connects to green in both pics.

I PM'd you. I'll try to help more tomorrow.

[Nivaldo Veliz]

ok, thank-you :)