DIY Window Regulator

[Bigwave]

I need to replace my passanger side WR for short. I see a few DIY that get down to the panel removal and stops at the inner panel. Does anyone have a complete DIY on this. Just want to know if there is any suprise or trick getting the inner panel off or the WR replaced.

TIA

Dave

[RFM]

http://www.renntech.org/forums/tutorials/article/7-door-micro-switch/ Use this, the window regulator is mounted on the back of the inner pannel. Hope it helps.

[Bigwave]

Thanks RFM. I saw that post and was very helpful to the point of getting to the inner panel. I was looking for find out if I need to remove that panel and disconnect the airbag etc.. Just need the last few steps to be sure.

[RFM]

Removing the inner panel is the best option, so airbag disconnection is needed. Replacing the regulator with the panel still partially attached to the door is hard to do for someone without experience, maybe something for next time.

[Bigwave]

Got it thanks

[Bigwave]

Does anyone have a step by step from the point of removing the inner panel and replacing the actual Window Regulator? The link for the Micro Switch is great up to that point but would like the last steps if possible

TIA

Dave