Routing Wires Through Engine Firewall

[Wicked 996]

Doing some stereo stuff and need to run some wires from my engine compartment to the dash. I would prefer not to have to run then under the car and then up (although is there a place to come up into the car from under). I would prefer to come through the firewall (engine) if possible. I cant see much in there so I was hoping someone might know of a hidden unused grommet somewhere I can pass a couple wires through (preferably on the driver side - although at this point I would take either side :) )

Thanks!

[Loren]

Doing some stereo stuff and need to run some wires from my engine compartment to the dash. I would prefer not to have to run then under the car and then up (although is there a place to come up into the car from under). I would prefer to come through the firewall (engine) if possible. I cant see much in there so I was hoping someone might know of a hidden unused grommet somewhere I can pass a couple wires through (preferably on the driver side - although at this point I would take either side :) )

Thanks!

[Wicked 996]

Doing some stereo stuff and need to run some wires from my engine compartment to the dash. I would prefer not to have to run then under the car and then up (although is there a place to come up into the car from under). I would prefer to come through the firewall (engine) if possible. I cant see much in there so I was hoping someone might know of a hidden unused grommet somewhere I can pass a couple wires through (preferably on the driver side - although at this point I would take either side :) )

Thanks!

Thanks loren - this will help a lot. Looks like there are bog ones on either side of the engine bay. Hopefully they are accessible :)

[Wicked 996]

well i was able to get my wires run through. Just an FYI - to access those large grommet son either side requires pulling a good majority of interior parts - side panels, pillars, etc. But once there its easy lol

[Doug996InKC]

Here are some of my photos of an install I did last year. It may give you some ideas on routing wires, etc.

My DIY Sound System Install