Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

optical wavelength

tekky
 Share

Recommended Posts

tekky Member

tekky

Posted
Posted

Hi guys,

Very useful thread, I was hoping somebody could help/confirm the optical wire I need for the following application:

I have a 2005 C2S cab (997) with PCM, the PCM does have navi/phone buttons but I do not think either are hooked up ( I do not have a nav unit in the loggage compartment ).

I purchased the CDC4 changer/mount etc but the wire I have does not work since I have the amp/booster.

The instruction manual I have reads 997.622.712.00 Optical waveguide LWL, without nav unit, is this what I need? if so it is not listed above. I basically need a 1 to 2 optical wire if that makes sense since I need it to hook up to both the booster and the changer.

I found a post on this forum for the 996 but are not sure if it will be the same as 997 or not since the installation tech manual does not include some of those part numbers listed there

Thanks for your help in advance

Sam

  • Admin
Loren Member

Loren

Posted
  • Admin
Posted
Hi guys,

Very useful thread, I was hoping somebody could help/confirm the optical wire I need for the following application:

I have a 2005 C2S cab (997) with PCM, the PCM does have navi/phone buttons but I do not think either are hooked up ( I do not have a nav unit in the loggage compartment ).

I purchased the CDC4 changer/mount etc but the wire I have does not work since I have the amp/booster.

The instruction manual I have reads 997.622.712.00 Optical waveguide LWL, without nav unit, is this what I need? if so it is not listed above. I basically need a 1 to 2 optical wire if that makes sense since I need it to hook up to both the booster and the changer.

I found a post on this forum for the 996 but are not sure if it will be the same as 997 or not since the installation tech manual does not include some of those part numbers listed there

Thanks for your help in advance

Sam

997-1 C2 only

post-1-1242066348_thumb.png

tekky Member

tekky

Posted
  • Author
Posted

Thank you Loren,

So it seems that I need 997.622.712.00 can you please confirm to make sure I ordered the correct wiring.

Thanks again for the quick, prompt and helpful reply!

Sam

Hi guys,

Very useful thread, I was hoping somebody could help/confirm the optical wire I need for the following application:

I have a 2005 C2S cab (997) with PCM, the PCM does have navi/phone buttons but I do not think either are hooked up ( I do not have a nav unit in the loggage compartment ).

I purchased the CDC4 changer/mount etc but the wire I have does not work since I have the amp/booster.

The instruction manual I have reads 997.622.712.00 Optical waveguide LWL, without nav unit, is this what I need? if so it is not listed above. I basically need a 1 to 2 optical wire if that makes sense since I need it to hook up to both the booster and the changer.

I found a post on this forum for the 996 but are not sure if it will be the same as 997 or not since the installation tech manual does not include some of those part numbers listed there

Thanks for your help in advance

Sam

997-1 C2 only

post-1-1242066348_thumb.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.