Will these Wheels fit my 986 boxster?

[CJ_Boxster]

Im in the middle of buying some used Porsche Turbo 2's from a widebody 996 TwinTurbo... Will these wheels fit my boxster?

They are the wheels pictured in the image below.

[Loren]

Either read the width and offset off the wheels or get the part numbers.

Fronts should be ok - rears may need spacers.

[CJ_Boxster]

So far I've been able to get this much info on the wheels, They are Stockers from a 2001 996TT. I checked the 996tt parts cataloge and it looks like they have a variety of wheel sizes for the Turbo II's from

Fronts 8 - 8.5 x 18

Rears 10 - 11 x 18

[Loren]

8.5 x 18 were not stock on 996TT and only optional after MY03-- only on GT2.

The rears are likely ET 45 so I think that will be a real problem. I think you might get 10's under the rear fenders (if rolled) without rubbing (depending on tire size) but I don't think 11's will work.

Perhaps some Boxster owners can chime here...

[pk2]

CJ

Measuring from the outer edges of my Turbo twists, I have 18 x 8.5 in. front and 18 x10in. rear with no problem, in fact I have 7mm and 13mm spacers front and back respectively. Still plenty of room to spare. I put them on but don't recall what they came off of.

Regards, PK

Edited May 30, 2008 by pk2

[CJ_Boxster]

nice! thanks for the info PK2

Just to clarify, You have 7mm spacers in Front and 13mm Spacers in the Rear... Is that correct?

Edited May 30, 2008 by CJ_Boxster

[CJ_Boxster]

Also, What size are your tires on the rear?