Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Climate control LCD display replacement

clickman
 Share

Recommended Posts

clickman Member

clickman

Posted
Posted (edited)

Climate control LCD display replacement

Apparently the replacement displays are now available for the Boxster that are a drop-in, rather than requiring modification. Anyone tried one? Note the symbols in the picture aren't the same as in my stock display (2001). eBay Item 280204048482 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...1%3D%26_fvi%3D1 __________________ Norm 2001 Boxster, 5 spd, Seal Grey

 

Edited by clickman
clickman Member

clickman

Posted
  • Author
Posted

That's for the one you've got to make some mods to make fit. The one I linked to is supposed to be a drop-in. So I'm curious to see if it really is a drop-in, i.e. no chopping required.

And I'm getting some conflicting info on whether the "bigger" one has the stock Porsche symbols, vs the non-Porsche symbols shown on the drop-in unit.

Norm

clickman Member

clickman

Posted
  • Author
Posted (edited)

Well, I bought one. With USPS and Canada Post combining their considerable talents, it should get here in about 3 weeks.

The symbols won't be stock, but I'm getting tired of the "rising sun" and missing segments, and the price is right.

Anyone interested in a full DIY?

post-16736-1204922727_thumb.jpg

Edited by clickman
1schoir Member

1schoir

Posted
Posted
Well, I bought one. With USPS and Canada Post combining their considerable talents, it should get here in about 3 weeks.

The symbols won't be stock, but I'm getting tired of the "rising sun" and missing segments, and the price is right.

Anyone interested in a full DIY?

post-16736-1204922727_thumb.jpg

Clickman:

A full DIY would be useful as this seems to be a somewhat common occurence, and the alternative (new part from Porsche) is astronomical.

Regards, Maurice.

  • Moderators
Tool Pants Member

Tool Pants

Posted
  • Moderators
Posted

Looks like the seller recently came out with a slightly smaller LCD just for Porsche. Dont't know anyone who has tried this version, just the original version that required modifications for the LCD to fit.

The symbols in both versions are the same but, as you note, not identical to Porsche as the display is an Audi unit. Big deal.

Let us know how the smaller LCD works out.

Meerzee Member

Meerzee

Posted
Posted

Bought this unit after waiting for months for the seller to complete the Porsche specific LCD screen. Put it in this morning, simply perfect.

Only difference in the instructions was that I had 2 Torx (T-20) screws holding my Climate unit in place (instead of 2 phillips as mentioned in the instructions)

It looks simply perfect and after doing one, I could say that I could easily do the whole job in less than 10 minutes including prep and cleaning.

One of the best deals out there for the "Rising Sun" syndrome...... sure beats $600+

:D

Good stuff..... :lol: :lol: :lol:

gstoli Member

gstoli

Posted
Posted
Anyone interested in a full DIY?

I am in, but I do not know anything about LCD's. Have opened the A/C face several times though. But really, can we DIY the LCD? That's supposed to be high tech...

clickman Member

clickman

Posted
  • Author
Posted

Just finished the install. It was pretty easy. Took less than an hour. Meerzee's right, having done it once, I could do another one in a heck of a lot less.

As far as making a DYI, with the unit I bought from Circuit Solutions (eBay), the instructions were just excellent. Step by step, with clear colour pics, and perfect English. So I'm not going to bother with making another DYI.

contigo Member

contigo

Posted
Posted

Bought it also but after 1 month they didnt ship, I was sent the tracking nos yesterday, dont expect any problems, agree beats buying a new unit which was the only option ....

  • 1 month later...
Tim986S Member

Tim986S

Posted
Posted

I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

clickman Member

clickman

Posted
  • Author
Posted
I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

Don't know why it wouldn't work, but you can always confirm with the vendor

  • Admin
Loren Member

Loren

Posted
  • Admin
Posted
I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

According to PET MY01 has a different part number from MY00 and earlier and MY02 and later.

MY01 was also the last year of a gloss black finish.

The parts list says (only) 996.653.101.08.EFR

Tim986S Member

Tim986S

Posted
Posted
I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

According to PET MY01 has a different part number from MY00 and earlier and MY02 and later.

MY01 was also the last year of a gloss black finish.

The parts list says (only) 996.653.101.08.EFR

thanks for the feedback, I bought it off ebay this evening (it was closing literally minutes after I saw it) so I'm going to give it a go.

tholyoak Member

tholyoak

Posted
Posted (edited)

On the boxster, 2001/2002 is a year specific model using the comfort CAN bus, the 2002 controller is the same as the 2001 but has matte buttons. In 2003 the it was updated for the additional CAN bus communication to the PCM/CDR23. You can use a 2003-later controller on a 2001/2002 but it will have a PCM error. You can't use a 2001/2002 on a 2000 or earlier car, but you can swap the face plates between all the models.

If you want the correct model for your car, I believe I have an extra one kicking around.

Todd

Edited by tholyoak
perryinva Member

perryinva

Posted
Posted
Looks like the seller recently came out with a slightly smaller LCD just for Porsche. Dont't know anyone who has tried this version, just the original version that required modifications for the LCD to fit.

The symbols in both versions are the same but, as you note, not identical to Porsche as the display is an Audi unit. Big deal.

Let us know how the smaller LCD works out.

I installed it in my 996. The instructions that come with the unit are perfect, and it works exactly as advertised, and drops right in. About 30 min start to finish, total. (really!) The ONLY issue I would have, and it is minor, is that the full contrast is really only available if viewed straight on. Installed, wee view it from above & at an angle, so the black background is not as black as viewed straight on.

perryinva Member

perryinva

Posted
Posted
I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

According to PET MY01 has a different part number from MY00 and earlier and MY02 and later.

MY01 was also the last year of a gloss black finish.

The parts list says (only) 996.653.101.08.EFR

thanks for the feedback, I bought it off ebay this evening (it was closing literally minutes after I saw it) so I'm going to give it a go.

Let us know how the older unit worked out, please!

  • 2 weeks later...
Tim986S Member

Tim986S

Posted
Posted
I have a 2001 986 and the climate display has just started going wrong, I extracted the unit and it's P/N 996 653 101 07. Will an earlier version of the unit work (say a '99 model P/N 996 653 101 03) or does it need to be identical P/N code?

According to PET MY01 has a different part number from MY00 and earlier and MY02 and later.

MY01 was also the last year of a gloss black finish.

The parts list says (only) 996.653.101.08.EFR

thanks for the feedback, I bought it off ebay this evening (it was closing literally minutes after I saw it) so I'm going to give it a go.

Let us know how the older unit worked out, please!

Fitted the earlier unit and it hasn't gone to plan! The instrument cluster does not show any sign of life now, swapped the old climate unit back and still no instrument cluster power (no lcd display or instrument readings. The car starts up fine, lights work, wipers, locks etc but no instrument cluster. I looked over all the fuses and they all seem fine. Any ideas before I resort to ringing up the main dealer?

tholyoak Member

tholyoak

Posted
Posted (edited)

As I stated previously, the earlier and later units are not compatible. The pin connectors, while the same, have completely different assignments and only two of the 4 are used on the later controller while four are used on the earlier one. You most likely have fried something. Why ask advice if you are simply going to ignore it?

-Todd

Edited by tholyoak
Tim986S Member

Tim986S

Posted
Posted
As I stated previously, the earlier and later units are not compatible. The pin connectors, while the same, have completely different assignments and only two of the 4 are used on the later controller while four are used on the earlier one. You most likely have fried something. Why ask advice if you are simply going to ignore it?

-Todd

Todd - I didn't catch your reply before I tried it. I looked at the fuses in closer detail by pulling the instrument cluster ones out and found that one had blown. Replaced it and all ok apart from still having the LCD problem.

Did you say you had one that would work?

  • 1 year later...
Agustin Member

Agustin

Posted
Posted

Hello,

Could anybody tell me where I can buy a display, mines is "bloody" as well and would like to change it.

Thx for your answers!

Apparently the replacement displays are now available for the Boxster that are a drop-in, rather than requiring modification. Anyone tried one?

Note the symbols in the picture aren't the same as in my stock display (2001).

eBay Item 280204048482

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...1%3D%26_fvi%3D1

__________________

Norm

2001 Boxster, 5 spd, Seal Grey

  • Admin
Loren Member

Loren

Posted
  • Admin
Posted
Hello,

Could anybody tell me where I can buy a display, mines is "bloody" as well and would like to change it.

Thx for your answers!

Apparently the replacement displays are now available for the Boxster that are a drop-in, rather than requiring modification. Anyone tried one?

Note the symbols in the picture aren't the same as in my stock display (2001).

eBay Item 280204048482

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...1%3D%26_fvi%3D1

__________________

Norm

2001 Boxster, 5 spd, Seal Grey

Cracked or Bleeding Climate Control, DIY

clickman Member

clickman

Posted
  • Author
Posted
Could anybody tell me where I can buy a display, mines is "bloody" as well and would like to change it.

Circuit Solutions on eBay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.