Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Recommended Posts

Posted

Hi all;

looking at buying a 3 month old C2S that doesnt have a rain sensor & auto dim rear view mirror fitted;

my question is can this be retrofitted ?

I fitted one to my 996 with no problems at all

Thanks

David

Posted

Hi,

The rain sensor is part of the windshield and this would need to be replaced.

The dimming mirror needs power. Also, the outside mirrors would need to be replaced.

Paul

  • Admin
Posted
The rain sensor is part of the windshield and this would need to be replaced.
With all due respect - no it is not part of the windshield. It is attached by a self-adhesive.

Porsche published a group of TSBs for the 996 on this retrofit - but the 997 is different I suspect you will need to add some wiring for all the parts then have them turned on with a PIWIS tester.

It can probably be done but I have yet o see anything published from Porsche - so you would need to have a look at the wiring diagrams and make sure you get all the right parts. BTW the rain sensor part is different depending on whether it is a coupe or cab AND whether or not you have the dimming mirrors.

Posted

David, I would not worry about those 2 options. Should not be a deal breaker. IMHO, I think those two options are some of the most "worthless" ones offered. But, then again, I don't drive in the rain, and very little at night.

Posted

I find the rain sensor a really worthwhile addition in the climate over here. The one that Porsche offer as a retrofit kit is made by Xanonex in Germany, and they don't produce a unit compatible with the 987/997. As Loren says, I think it would be a whole lot more difficult than the plug-and-play unit for the 996.

Posted

thanks for the replies;

I did retrofit the rain sensor to my 996 a couple of years ago - as you say Richard in our climate it is a real advantage. Was quite easy to install too.

I spoke with an OPC yesterday who confirmed that Porsche do not sell a retrofit kit for the 997.

But, as I am stubborn, I'll see if I can find a way around it !

No, it's not a deal breaker - I was spoilt as my previous (now deceased) 997s had virtually every option in the book !

If anyone comes up with a bright idea on this please let me know !

Thanks

David

Posted (edited)

The rain sensor is shown on the PET with what looks like a wiring harness and plug. There isn't a special wiper switch for the rain sensor option (I268) so my guess is that it might be "simply" a case of fitting the sensor and getting it programmed with a PIWIS. This is how it is done with the 987/997 cruise retrofit kit. Like I say, it's a guess.

The sensor is about £150+VAT, BTW.

tmp.pdf

Edited by Richard Hamilton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.