TRG Rear Sway - Torque Specs?

[PJorgen]

I'll be installing TRG's rear sway bar and drop links next weekend. Can someone give me the torque specs for the various nuts and bolts that I'll be working with?

I checked the M030 ROW install DIY and didn't find the specs for the sway bar and links. Are they there and I'm just being lame?

[Loren]

Model and year of your please?

[PJorgen]

Model and year of your please?

Dang it! I always forget to include this info - label me an idiot!

2002 C4S

[Loren]

Anti-roll bar mating bearing to spring strut (M52 x 1.5) (lock nut) - 911 GT3 -- 50 Nm (37 ftlbs).

Anti-roll bar to side member M10x1.5 -- 65 Nm (48 ftlbs).

Anti-roll-bar mount to anti-roll bar M10 - 911 GT3 /911 GT3 RS -- 55 Nm (41 ftlbs)*

Anti-roll bar mount to spring strut M10- 911 Carrera 4/911 GT3 -- 46 Nm (34 ftlbs)

Anti-roll bar mount to wheel carrier M10- 911 GT3 RS -- 50 Nm (37 ftlbs) **

* 3-stage tightening procedure. First Tighten to 50 Nm (37 fllb.). Then loosen by 90° and then tighten to 55 Nm (41 ftlb.).

** Coat threads with Loctite 243 before fitting. Tighten all threaded connections immediately.

[PJorgen]

Anti-roll bar mating bearing to spring strut (M52 x 1.5) (lock nut) - 911 GT3 -- 50 Nm (37 ftlbs).

Anti-roll bar to side member M10x1.5 -- 65 Nm (48 ftlbs).

Anti-roll-bar mount to anti-roll bar M10 - 911 GT3 /911 GT3 RS -- 55 Nm (41 ftlbs)*

Anti-roll bar mount to spring strut M10- 911 Carrera 4/911 GT3 -- 46 Nm (34 ftlbs)

Anti-roll bar mount to wheel carrier M10- 911 GT3 RS -- 50 Nm (37 ftlbs) **

* 3-stage tightening procedure. First Tighten to 50 Nm (37 fllb.). Then loosen by 90° and then tighten to 55 Nm (41 ftlb.).

** Coat threads with Loctite 243 before fitting. Tighten all threaded connections immediately.

Thanks Loren, appreciate the quick reply!