Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Litronic lights... It was supposed to be so easy ;)

WilliamsF1
 Share

Recommended Posts

WilliamsF1 Member

WilliamsF1

Posted
Posted

Hey Forum...

I have searched the forum for a answer to this one...

I have bought a set of XENON from design911UK. I asked before I purchased if I needed anything else, but I was told I only needed the headlights - however it seems I am missing something!

Because I dont have the wires to fit the back of the headlamp - a small plug, only the wires that was originally installed in my halogens.

When I turn on the lights they light up very nicely but I am not if they adjust how they are supposed to - help please :)

What am I missing ?

My car is a 1998 (May) Boxster, tiptronic.

Kind regards

Morten

  • Moderators
Tool Pants Member

Tool Pants

Posted
  • Moderators
Posted

You are missing the control unit and the wiring harness. 4 wires come from the control unit to the headlight, and another 4 wires go to the other headlight. There are people like you who just put in the headlights and do not bother with the control unit.

post-4-1182378491_thumb.jpg

WilliamsF1 Member

WilliamsF1

Posted
  • Author
Posted
You are missing the control unit and the wiring harness. 4 wires come from the control unit to the headlight, and another 4 wires go to the other headlight. There are people like you who just put in the headlights and do not bother with the control unit.

Where can I buy this control-unit-kit ? And is it complicated to install ?

If I do not install this kit, can I then manually adjust the angle of the lamps ?

Thanks ToolPants, second time you help me out this week - amazing...

  • Moderators
Tool Pants Member

Tool Pants

Posted
  • Moderators
Posted

You can buy the control unit from any Porsche dealer. If you had purchased the litronic retrofit kit then it would have been included in the box with the headlights. Some people who buy the retrofit kit do not install the control unit and if you can find a person like that you may be able to buy the control unit.

It is not hard to install. You need to remove everything in the front trunk. You need to hook up wires to the control unit so that it will operate, and then the wires from the control unit to the headlights. Porsche has written instructions on how to do this. The local owners also filmed how to do this and put it on a DVD. In the picture Henry is holding the control unit while Ray is filming.

The purpose of this control unit is simple. The low beam/lamp is xenon. The high beam/lamp is halogen. If the control unit is connected then when you turn on the high beam the low beam rotates up a few degrees to combine both beams. This rotation is done via a motor in the headlight. But without the control unit the motor will not work. Your plug with no wires to it is to operate this motor.

You can still manually adjust the angle of the lamps without the control unit.

post-4-1182385329_thumb.jpg

sundeepg Member

sundeepg

Posted
Posted
You can still manually adjust the angle of the lamps without the control unit.

How do you manually adjust the angle on the lamps?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.