4 stalk OBC connector

[wzf18r]

My orginal car doesn't have OBC function.

I purchased the 4 stalks control unit and I also purchase a cluster that came with OBC function (when I start my car, the cluster will display outsode temperture and do a serive check on the car.)

Here is my question:

at the bottom of the 4 stalks control unit, there are two connection, one is for curse control and the other is the OBC.

I can't find any connector from my dash board are that connect to the OBC connector from the 4 stalks unit.

Can anyone give me some hint what can I do to make it works

thanks

[Loren]

http://www.whiteson.org/boxster/mods/obc/

[geoff]

Also see http://www.brackenrig.net/OBC_Hack.htm for an overview of the OBC

[Tool Pants]

The car is not prewired for the OBC and that is why you cannot find a connector.

You will need to buy the connector, 5 VW wires, and make a wiring harness. 4 wires go to a connector for the instrument cluster and the 5th wires goes to ground.

[wzf18r]

thanks

Do anyone know whether I can buy the female conector (showned on the above picuture) to fit in the male connector that came with the stalk unit

[Tool Pants]

You can buy it from Porsche or BMW. Much cheaper from BMW.

[kbrandsma]

I purchased the 4 stalk from Sunset in November and I am just now getting ready to do the hack. All parts were under $200 and the female connector or plug socket was $2.86 PN 999-650-513-40.