Door Window Height

[denisoreilly]

I thought I read somewhere that you can set the final height of the door window after say a new regulator, I am getting a squek and rattle close to the passenger mirror in the final up position it goes when the window is lowered a couple of mm, without removing the trim can I re-set a new final position? I'm naturally terrified going near airbags!

I have searched but recal reading after a new regulator is installed that you can set the final position by fully upping the window somehow, maybe I could insert some card into the upper roof groove and lower the window final position by 1 mm to eradicate the noise, lub into the window area only made things worse.

[Loren]

I thought I read somewhere that you can set the final height of the door window after say a new regulator, I am getting a squek and rattle close to the passenger mirror in the final up position it goes when the window is lowered a couple of mm, without removing the trim can I re-set a new final position? I'm naturally terrified going near airbags!

I have searched but recal reading after a new regulator is installed that you can set the final position by fully upping the window somehow, maybe I could insert some card into the upper roof groove and lower the window final position by 1 mm to eradicate the noise, lub into the window area only made things worse.

http://www.renntech.org/forums/index.php?s...ost&p=11090

[denisoreilly]

Cheers Loren,

mind me aksing what you mean by this?

"Here are the instructions - do it at your own risk..." ????

Anything I should watch out for?

[Loren]

Sure... you could break the window, jam the window, tear up the rubber molding, etc., etc.

The fit around the window is critical to the it closing properly, not leaking, not causing noise. So adjustments should be made very carefully (IMHO).

[Tool Pants]

And look at this. http://www.renntech.org/forums/index.php?showtopic=2673

[denisoreilly]

Cover me "I'm going in".....