Jump to content

Welcome to RennTech.org Community, Guest

There are many great features available to you once you register at RennTech.org
You are free to view posts here, but you must log in to reply to existing posts, or to start your own new topic. Like most online communities, there are costs involved to maintain a site like this - so we encourage our members to donate. All donations go to the costs operating and maintaining this site. We prefer that guests take part in our community and we offer a lot in return to those willing to join our corner of the Porsche world. This site is 99 percent member supported (less than 1 percent comes from advertising) - so please consider an annual donation to keep this site running.

Here are some of the features available - once you register at RennTech.org

  • View Classified Ads
  • DIY Tutorials
  • Porsche TSB Listings (limited)
  • VIN Decoder
  • Special Offers
  • OBD II P-Codes
  • Paint Codes
  • Registry
  • Videos System
  • View Reviews
  • and get rid of this welcome message

It takes just a few minutes to register, and it's FREE

Contributing Members also get these additional benefits:
(you become a Contributing Member by donating money to the operation of this site)

  • No ads - advertisements are removed
  • Access the Contributors Only Forum
  • Contributing Members Only Downloads
  • Send attachments with PMs
  • All image/file storage limits are substantially increased for all Contributing Members
  • Option Codes Lookup
  • VIN Option Lookups (limited)

Loren

Admin
 View Profile  See their activity

  • Posts

    37,533

  • Joined

  • Days Won

    573

 Content Type 

Everything posted by Loren

  1. Loren
    I've known more than a couple MY97 Boxster owners that have to replace one or both O2 sensors every 2-4 years. I can not say that the issue is not the harness - but changing any harness is not an easy task. For some reason the heating element on MY97 cars seems to trigger these faults and I though it was a design/programming issue on the early cars. Just me 2 cents...
  2. Loren
    is your car an "S"? I seem to recall you had to use an "S" bumper or a Carrera bumper.
  3. Loren
    Try 0790
  4. Loren
    Central locking synchronization Fault code 46, 47 These faults are stored in the memory if at least one safe contact does not reach the safe position after two synchronisation actuations towards safe. 1. With PST 2 (drive links), check whether the servo motor reacts with the door closed. If the servo motors react, select "Driver's side locked" and "Passenger's side locked" in the menu item Input signals, and close the doors Vehicle not locked Central locking limit position unlocked not reached Fault code 61 This fault is stored in the following cases: Short circuit to voltage/ground or open circuit in the supply lead to plug II pin 3 Short circuit to voltage/ground or open circuit in the supply lead to plug I pin 5 Short circuit to voltage/ground or open circuit in the supply lead to plug I pin 28 Short circuit to voltage/ground or open circuit in plug I pin 29 Short circuit to voltage/ground or open circuit in plug I pin 30
  5. Loren
    From the Lost Radio Code FAQ... "Can you give me a code for my PCM? These units are manufactured jointly by Siemens and Becker, and the only place where you can get the codes required is from the dealer/OPC. The PCM’s require two codes, the ICS/Siemens code, and a Becker code. The ICS is the first code requested. Sorry, the only place you can get a PCM code is from a dealer/OPC."
  6. Loren
    Try 9521
  7. Loren
  8. Loren
    Bad slave cylinder, bad bleed valve, clogged brake clutch line? The car is likely 20 plus years old.
  9. Loren
    The car needs to have both the tie rods and the suspension checked for wear or damage.
  10. Loren
    Fault code 49 is the seatbelt buckle on the passenger side.
  11. Loren
    Optional Clutch Bleeding This is best done when you are bleeding the left (driver's side) rear wheel as the clutch bleed valve is mounted high above the axle on the transmission. Push the clutch pedal in by hand (very slowly) and use a long piece of wood to hold the pedal down. I wedged the other end (of the wood) between the seat and door frame -- with plenty of soft padding to avoid scratches. A second option is to have a 2nd person sit in the car and keep the clutch pedal FULLY depressed. Open the clutch bleeder valve until clear, bubble free brake fluid emerges (at least 30 seconds according to Porsche). Remove the wood. Then, pump the pedal again very slowly by hand for a further 60 seconds. After pressing the pedal down fully about 10 to 15 times, leave the pedal in its normal position. After allowing a fill time of 90 seconds, check that no more air bubbles appear at the bleeder valve (use a collecting bottle with a transparent hose). Then close the bleeder valve. Wipe off the area and replace the rubber protective cap over the bleed screw. You may notice that the clutch pedal does not return... so carefully pull it up (slowly) to it's normal position. Then depress it (slowly) a few (at least 5) times. In a few cycles the feel should return.
  12. Loren
    Sorry, I missed your original post. Try 5054
  13. Loren
    I answered your post - just above your second post.
  14. Loren
    Try 0810
  15. Loren
    Try 2356
  16. Loren
    The loud click I heard sounds like the AC clutch kicking in. Perhaps a little loud but it does not sound like an engine noise.
  17. Loren
    Try 6803
  18. Loren
    Try 9854
  19. Loren
    Try 9610
  20. Loren
    Try 9130
  21. Loren
    Try 0212
  22. Loren
    I answered this already above. Try 9595
  23. Loren
    Try 1049
  24. Loren
    Try 6816
  25. Loren
    Try 9595
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.